Yamaha APEX RX10RY Owner's Manual page 16

Control functions
a digital speedometer (which shows the
G
riding speed)
a tachometer (which shows engine speed)
G
an odometer (which shows the total dis-
G
tance traveled)
two tripmeters (which show the distance
G
traveled since they were last set to zero)
a barometer (which shows the ambient
G
barometric pressure)
a clock
G
warning indicators (which show self-diag-
G
nosis, coolant temperature, fuel level, and
oil level warnings)
indicator lights (which show high beam and
G
low coolant temperature conditions)
a warning light (which shows warnings to-
G
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
G
ing in the fuel tank)
a grip/thumb warmer level indicator (which
G
shows the grip warmer level or the thumb
warmer level)
a display brightness control function
G
After the engine is started, the tachometer
makes one sweep, and the low coolant tem-
perature indicator light, the warning light, and
all segments of the meter display turn on and
off once.
1. Tachometer
2. Low coolant temperature indicator
light " "
3. Warning light "
4. Meter display
10
"
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
Odometer, tripmeter, and barometer
modes
Pushing the "SELECT" button switches the
display between the odometer mode "ODO",
tripmeter modes "TRIP A" and "TRIP B", and
barometer mode "BARO".
1. "SELECT" button
To reset a tripmeter, push the "RESET" button
for at least 1 second while the tripmeter is dis-
played.
TIP
To switch the speedometer, odometer, and
G
tripmeter displays between kilometers and
miles, select the odometer mode "ODO",
and then push the "SELECT" button for at
least 10 seconds while the snowmobile is
stopped.
To switch the barometer display between
G
hectopascal "hPa" and inches of mercury
"inHg", select the barometer mode "BARO",
and then push the "SELECT" button for at
least 3 seconds while the snowmobile is
stopped.