Detach The Camera - Panasonic WV-NS202A Installation Manual

Detach the camera

The camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instruc-
tions below.
Important:
Do not detach the camera in a different way from the one described below. It may damage the camera.
Step 1
Rotate the decorative cover counterclockwise until the
indication "OPEN" reached the decorative cover guide
of the mount bracket.
Detach the decorative cover.
LOC K
O PE N
Step 2
Detach the DC 12 V power cord plug and the LAN
cable from the camera, and then turn off the power of
the camera.
Step 3
Remove the fixing screw that is fixing the camera on the
mount bracket.
Do not lose the fixing screw.
20
LOCK OPEN
LOCK OPEN
Step 4
Rotate the camera counterclockwise to detach the cam-
era from the mount bracket.
Mount bracket
Camera
Important:
When detaching the camera from the camera
mount bracket, hold the base of the camera.
Detaching the camera while holding the moving
part may result in malfunction.
Step 5
Detach the cables from the camera.
Step 6
Detach the safety wire from the camera.
Base
Moving part