[Connection Example] - Panasonic WV-NS202A Installation Manual

[Connection example]

When connecting with a PC directly
Speaker (sold separately)
Microphone (sold separately)
<Required cable>
LAN cable (category 5, cross)
When connecting to a network using a PoE device (hub)
Speaker (sold separately)
Microphone (sold separately)
Speaker (sold separately)
Microphone (sold separately)
<Required cable>
LAN cable (category 5, straight)
Important:
• The monitor out connector is provided only for checking the adjustment of the angular field of view on the video
monitor when installing the camera or when servicing. It is not provided for recording/ monitoring use.
• Depending on the monitor, some characters (camera title, preset ID, etc.) may not be displayed on the screen.
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• Power supply is required for each network camera. When using a PoE device (hub), DC 12 V power supply is
unnecessary.
PC
LOCK
OP EN
LAN cable (category 5, cross)
Video monitor
(for adjustment)
PoE device (hub)
LOCK
OP EN
LAN cable (category 5,
straight)
LOCK
OP EN
LAN cable (category 5,
straight)
Video monitor
(for adjustment)
DC 12 V
power supply
LAN cable (category 5,
straight)
PC
19