Panasonic WV-NS202A Installation Manual page 17

Step 9
After completing the cable connections, attach the pro-
vided decorative cover.
q Align the indication "OPEN" of the decorative cover
to the decorative cover guide of the mount bracket.
Wire without making a hole in the ceiling
Step 1
Install the camera by following step 1 and steps 3 – 8 of the "Wire through a hole in the ceiling" section ( pages 14 -
16). It is unnecessary to make a hole in the ceiling as described in step 2 of the "Wire through a hole in the ceiling"
section.
Step 2
Remove the tab on the rear of the decorative cover that is blocking the wiring hole.
Attach the decorative cover by following step 9 of the "Wire through a hole in the ceiling" section ( pages 14 - 16).
Wire through the wiring hole of the decorative cover.
O P E N
Decorative cover guide
LO C K
O P E
N
Decorative cover
(standard accessory)
w Rotate the decorative cover clockwise until the indi-
cation "LOCK" reaches the decorative cover guide
of the mount bracket.
LO CK
O P E
N
Important:
Make sure that no cable is pinched by the decora-
tive cover.
LOCK OPEN
LOCK OPEN
17