System Example 5 (Infrared Output Connection); System Example 6 (Ip Image Transmission, Poe+) - Panasonic AW-UE70KP Operating Instructions Manual

Connections
■

System example 5 (infrared output connection)

You can point the infrared remote control of a commercially available controller toward the camera to operate it.
Commercially
available controller
RS-232C connector
● Configure the service switches at the bottom of the unit.
For details on the service switches, see "Service switch settings" (page 42).
SW6 Infrared output
■

System example 6 (IP image transmission, PoE+)

Personal computer
24
(continued)
Remote camera control signal
RS-232C cable
(including infrared remote
control signals)
RS-232C
connector
Supplied AC adaptor
Set to ON.
LAN cable
LAN cable
PoE+ compatible switching hub
AW-UE70
Infrared remote control supplied with
commercially available controller
AW-UE70
IP decoder
(commercially available)
Monitor
Monitor 1
Monitor