Panasonic WV-NP1004 Network Operating Instructions page 8

Operation
Acknowledge alarm occur-
rences *2
Turn on/off audio
Display a still picture (one
shot)
8
Click this button when using the camera in the nighttime with
near-infra red rays as light source.
Important:
Switching action between color and B/W (black and white)
cannot be performed unlimitedly due to the durability of
the parts used for this function (approx. 5 000 actions at
maximum). Try not to frequently switch the color of the dis-
played image by clicking the [ON] and [OFF] buttons alter-
nately.
When selecting "AUTO1" or "AUTO2" for use of the cam-
era under the environment where brightness changes fre-
quently, confirm that the switching action is not frequently
carried out.
When the switching action is frequently carried out, adjust
the parameter of "LEVEL" and "DURATION TIME" on the
"BW MODE" page (page 62).
This button will be displayed and will blink when an alarm
occurred. When this button is clicked, this button will disap-
pear and the alarm output connector will be reset.
(☞ page 32)
When this button is clicked, the button will turn into the
button and audio will not be heard.
When this button is clicked, the button will turn into the
button and audio will be heard.
* The [Audio] button will be displayed only when "ON" is selected for "Mic mode"
on the setup menu. (☞ page 28)
When this button is clicked, a new window will open and the
still picture (one shot) displayed on the "Live" page will be dis-
played on it.
To save this picture on a PC, right-click on the image and
select "Save image as..." on the displayed pop-up menu.
Description