Panasonic WV-NP1004 Network Operating Instructions page 47

Configure the schedule settings of the FTP periodic transmission [Schedule
setup]
Click the [FTP] tab on the "Network setup" page. (☞ page 41)
The schedule settings of the FTP periodic transmission can be configured on this page. Refer to page 45 for further
information about the settings relating to the FTP periodic transmission.
How to configure the schedule settings
Step 1
Check the check box of the desired day of the week.
→ The selected day of the week will be validated for
the schedule.
Step 2
To designate time, click [i] and select the desired
"hour" and "minute".
When not designating time, check the checkbox of "24
hours".
Step 3
Click the [SET] button after completing the settings.
→ The result will be displayed at the bottom of the win-
dow.
47