Panasonic WV-NP1004 Network Operating Instructions page 27

Configure the camera settings such as image quality and brightness, etc.
[Camera]
Click the [Camera] tab on the "Camera setup" page. (☞ page 23)
The following are descriptions of how to configure the settings relating to image quality and brightness, etc. Refer to
the operating instructions for further information about the setup items (camera setup page). Refer to page 52 for
descriptions of how to operate the setup items (camera setup page).
Note:
The "Camera setup" page on the [Camera] tab can be displayed on a video monitor and can be configured using
the operation buttons on the camera.
Operation panel
About the operation panel
Use the following buttons on the operation panel to operate the "Camera setup" page using a PC.
[ON] button:
Click this button to display the top page of the
"Camera setup" page.
[OFF] button:
Click this button to close the "Camera setup" page.
[SET] button:
Click this button to move to the submenu.
[Left] button/
Click these button to select the parameters.
[Down] button/
Click these buttons to move the cursor.
[ESC] button:
Click this button to return to the previous page.
[Right] button:
[Up] button:
[RESET] button:
Click this button after moving the cursor onto the
desired setup item to reset to the default setting.
[ALL RESET] button:
By clicking the [ALL RESET] button after moving the
cursor on "CAMERA RESET" on the "SPECIAL
SETUP" page (☞ page 57), all the settings except
the network settings can be reset to the default set-
tings.
Note:
Refer to page 51 for descriptions of how to reset the
network settings.
27