Panasonic WV-NP1004 Network Operating Instructions page 64

Adjust the electronic zoom
The electronic zoom is operable using a remote controller.
Step 1
Select "ON" for "EL-ZOOM" on the "CAMERA SETUP"
page.
→ The "EL-ZOOM" page will be displayed.
**EL-ZOOM**
PAN/TILT PUSH SW
ZOOM PUSH SW
RET TOP END
Step 2
Move the cursor onto "ZOOM" and press the [SET] but-
ton.
→ Images to which zooming can be applied will be dis-
played.
**EL-ZOOM**
PAN/TILT PUSH SW
ZOOM PUSH SW
U ZOOM D
RET TOP END
Step 3
Adjust zooming level pressing the [Up] and [Down] but-
tons. After completing the adjustment, press the [SET]
button.
→ The "EL-ZOOM" page will be displayed.
64
Step 4
Move the cursor onto "PAN/TILT" and press the [SET]
button.
→ Images to which panning/tilting can be applied will
be displayed.
**EL-ZOOM**
PAN/TILT PUSH SW
ZOOM PUSH SW
U TILT D/L PAN R
RET TOP END
Important:
"PAN/TILT" is available only when images are
zoomed in.
Step 5
Adjust panning/tilting level pressing the [Left], [Right],
[Up] and [Down] buttons. After completing the adjust-
ment, press the [SET] button.
→ The "EL-ZOOM" page will be displayed.
Note:
When "ON" is selected for "EL-ZOOM", "PAN/TILT"
and "ZOOM" are operable using a system controller.