Panasonic WV-NP1004 Network Operating Instructions page 7

Operation
Change image capture size
Enlarge the displayed
images *2
Change brightness *2
Open/close the AUX con-
nector *2
Switch color of the dis-
played images between
color and B/W *2
Image capture size of the displayed image will be VGA.
Image capture size of the displayed image will be QVGA.
Image capture size of the displayed image will be 1280 x 960
pixels. (Available only when "Full scan" is selected for "Scan
mode")
Image capture size of the displayed image will be 960 x 720
pixels. (Available only when "Partial scan" is selected for
"Scan mode")
The image capture size of the displayed image can be changed only when display-
ing JPEG images.
The buttons respective to the image capture size will be displayed only when
"Use" is selected for the correspondent image capture size in the "Image capture
size" section of "JPEG setup" on the [JPEG/MPEG-4] tab. (☞ page 24)
Returns to the original display size (1x size).
Displays image with 2x size.
Displays image with 4x size.
Image will be darker.
Image will be displayed with the standard brightness.
Image will be brighter.
The AUX connector will open.
The AUX connector will close.
Images will be displayed in B/W (black and white).
Images will be displayed in color.
Images will be automatically switched between color and B/W
according to brightness (illumination).
Description
7