Panasonic WV-NP1004 Network Operating Instructions page 69

Symptom
Cannot access from the
browser.
No image is displayed.
Images are displayed blurry.
The image is not being
refreshed.
Images cannot be saved on
the SD memory card.
Cause/solution
• Is the power of the camera on?
Check if the power of the camera is turned on.
• Is the viewer software installed on a PC?
Install the viewer software on a PC.
• Is the lens cap detached?
Check if the lens cap is detached.
• Aren't there dusts or dirt on the lens?
Check if there are dust or dirt on the lens.
• Is the focus adjusted correctly?
Check if the focus is adjusted correctly.
• Depending on the version of your browser, there
might be difficulties refreshing the picture and operat-
ing the camera.
It is recommended to use Internet Explorer 6.0 SP2.
• Depending on the traffic of the network or the concen-
tration of access to the camera, there might be diffi-
culties displaying the camera picture. Click the reload
button of the browser to request the camera picture to
be refreshed.
• Is the SD memory card inserted correctly?
• Is the SD memory card formatted?
• Isn't the write protect switch set to "LOCK"?
When the write protect switch is set to "LOCK", avail-
able size/total size indication of the SD memory card
will be "**********KB/**********KB".
Reference
pages
Operating
instructions
Operating
instructions
–
–
Operating
instructions
Operating
instructions
–
Operating
instructions
22
–
69