Sharp DX-2500N Operation Manual page 99

Boss
(1)
7
8
9
10
11
• If this does not solve the problem, pull the knob out and push it back in 3 more times.
• When pulling and pushing the knob to clean the charger, pull and push the knob slowly from one end to the other.
(2)
(3)
1-58
BEFORE USING THE MACHINE
Replace the charger cleaner in its
original position.
(1) Rotate the charger cleaner after putting it
on the boss and hook its edge (the side that
does not have a handle) to the claw on the
left side.
(2) Place the right-hand side of the charger
cleaner on the inner side, spread across the
top of the claw.
(3) Hook the charger cleaner to the claw.
Mount the toner collection container.
Insert it in a direction slanting from the top towards the bottom.
(A direction opposite to that at the time of mounting it.)
Push the toner collection container into
the machine.
Push the toner collection container firmly in until it clicks into
place.
Lock the toner collection container.
Move the lock of the toner collection container to the lock
position.
Close the front cover.
Contents