Sharp DX-2500N Operation Manual page 399

Specifying the send size of the original
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
Touch the [Original] key.
1
+
IMAGE SETTINGS
Fax/Original
Scan Size
Auto
2
2-Sided 2-Sided
Tablet
Booklet
Fax/Original
Auto
Manual
Manual
A5
A5R
3 B5
216x340 216x343
• Depending on the "Scan Size" setting, it may not be possible to select some sizes for the "Send Size". Size keys
that cannot be specified for the "Send Size" are greyed out to prevent selection.
• To specify an Inch size for the send size, touch the [AB
send size.
(page 4-45)
OK
100% Send Size
A4 Auto
Image Orientation
(1) (2)
OK
B5R B4
AB
A4 A3
Inch
A4R
Touch the [Send Size] key.
Specify the send size.
(1) Touch the desired send size key.
(2) Touch the [OK] key.
Inch] key to highlight the [Inch] side and then specify the
4-52
FACSIMILE
Contents