Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

 
5.8 GHz Digital Cordless Answering System
Operating Instructions
KX-TG5480
Model No.
Pulse-or-tone dialing capability
The unit is Caller ID compatible. To display the caller's name and phone number,
you must subscribe to Caller ID service.
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for 6 hours before initial use.
Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico

Summary of Contents

  • Page 1

    The unit is Caller ID compatible. To display the caller’s name and phone number, you must subscribe to Caller ID service. PLEASE READ BEFORE USE AND SAVE. Charge the battery for 6 hours before initial use. Panasonic World Wide Web address: http://www.panasonic.com for customers in the USA or Puerto Rico...

  • Page 2

    Attach your purchase receipt here. Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.

  • Page 3

    For Best Performance Battery charge The handset is powered by a rechargeable Nickel-Metal Hydride (Ni-MH) battery. Charge the battery for 6 hours before initial use (p. 15). Base unit location/Noise Calls are transmitted between the base unit and handset using wireless radio waves.

  • Page 4: Table Of Contents

    Installation ....11 Connecting the AC Adaptor . . 11 Connecting the Telephone Line Cord....12 Installing the Battery in the Handset.

  • Page 5: Table Of Contents

    Temporary Tone Dialing (For Rotary or Pulse Service Users). . 59 For Call Waiting Service Users ....59 FLASH Button ... . . 60 Incoming Call Tone .

  • Page 6: Location Of Controls, Speaker

    Location of Controls Base unit [MEMO] Button (p. 72) [ERASE] Button (p. 71) Display (p. 10) [PROGRAM] PROGRAM PROGRAM Button (p. 51) [AUTO] Button (p. 51) [GREETING REC] (Record) Button (p. 27) Charge Contacts (p. 16) Antenna [*] (TONE) Button (p. 59) (p.

  • Page 7

    Handset Back side Speaker Display (p. 9) Headset Jack (p. 81) ] (TALK) Button (p. 32) ] (Speakerphone) Button (p. 32) [ ] (TONE) Button (p. 59) [HOLD/INTERCOM] Button (p. 34, 52) [FLASH/CALL WAIT] Button (p. 59, 60) For assistance, please call: 1-800-211-PANA(7262) Location of Controls Ringer/Message Alert Indicator (p.

  • Page 8

    Location of Controls How to use the soft keys/navigator keys Handset soft keys SPIPRIVACY1 IN USE LINE1 LINE2 SEARCH Pressing the right soft key selects “ Pressing the middle soft key selects “ Pressing the left soft key selects “ •...

  • Page 9: Displays, Display (p, Speaker

    Displays Handset 1 23 4 5 L1 L2 10 missed calls LINE1 “ ” and “ ” indicate the status of each line as follows: Off (invisible) The line is free. The line is being used. A call is on hold on the handset or base unit, or the Flashing Answering System is answering a call (p.

  • Page 10

    Displays Base unit 1 2 3 F F ULL LINE LINE LINE LINE “ ” flashes until you set the date and time, and flashes after a power failure. If it is flashing, set the date and time (p. 19). Message counter shows: —...

  • Page 11: Installation, Connecting The Ac Adaptor

    Fasten the AC adaptor cord. Hook Bottom of the base unit • USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •...

  • Page 12: Line Cord

    Installation Connecting the Telephone Line Cord Connect the telephone line cord(s) to the base unit. If your unit is connected to a telephone line with DSL service, see page 14. To connect to a 2-line telephone jack GREEN Plug 2-Line...

  • Page 13

    To connect to 2 single-line telephone jacks TRANSPARENT GREEN Plug Plug If you use the unit as a single-line telephone only TRANSPARENT Plug For assistance, please call: 1-800-211-PANA(7262) Installation Single-Line Telephone Jacks (RJ11C) 4-Wire Telephone Line Cord with GREEN Plugs...

  • Page 14

    Installation For DSL service users If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations or the unit may not display caller’s name and/or phone number properly. We recommend connecting a noise filter* (contact your DSL service provider) to the DSL telephone line between the base unit and the telephone line jack.

  • Page 15: The Handset, Battery Charge

    Installing the Battery in the Handset Insert the battery (1), and press it down until it snaps into the compartment (2). Close the cover. To replace the battery: Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one (p.

  • Page 16

    A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery Battery information After your Panasonic battery is fully charged, you can expect the following performance: Operation While in use (TALK) While not in use (Standby) While using the Clarity Booster feature (p.

  • Page 17: Programmable Settings, Programming Guidelines

    Programmable Settings Programming Guidelines The unit has several programmable functions which can be selected from the function menu on the display (p. 18). The soft key works The soft key works BACK as the key. as the key. BACK Navigator key scrolls Navigator key scrolls through the menu.

  • Page 18: Function Menu Table

    Programmable Settings Function Menu Table You can use the following functions to customize your unit. See the corresponding pages for function details. • After pressing [MENU], you can also program menu items directly by pressing ([0] to [9], [*] and [#]) instead of using the soft keys (p. 82, 83). Main menu p.

  • Page 19: Date And Time

    Date and Time Handset We recommend you set the date and time so that the unit will announce the day and time each message was recorded when you play back messages. Press [MENU]. Scroll to “Date and time” by pressing [d] or [B], then press the soft key ( (1) Enter 2 digits each for the month, day and year.

  • Page 20: Display Language, Dialing Mode

    Programmable Settings Display Language You can select either “English” or “Spanish” as the display language. The factory preset is “English”. Press [MENU]. Scroll to “Initial setting” by pressing [d] or [B], then press the soft key ( Scroll to “Change language” by pressing [d] or [B], then press the soft key ( To change from English to Spanish, press the soft key (...

  • Page 21: Line Mode

    Line Mode Handset The line mode for both lines is preset to “B” and generally should not be adjusted. If the line buttons on the base unit do not light properly, or the line status icons ( ) are not displayed on the handset properly, the line mode selection is incorrect.

  • Page 22: Auto Talk, Lcd Contrast

    Programmable Settings Auto Talk Handset The Auto Talk feature allows you to answer calls by simply lifting the handset off the base unit. You do not need to press [C] or [s]. The factory preset is OFF. Press [MENU]. Scroll to “Initial setting” by pressing [d] or [B], then press the soft key ( Scroll to “Auto talk”...

  • Page 23: Ringer Volume

    Ringer Volume You can set the handset and base unit ringer volumes to high, medium, low, or off for each line. The factory preset for both lines is HIGH. If the handset or base unit ringer is turned off for both lines, the handset or base unit will ring at the low level for intercom calls, and will not ring for outside calls.

  • Page 24

    Programmable Settings Temporary ringer off While the handset is ringing, you can turn the ringer off temporarily by pressing [OFF]. The handset will ring again the next time a call is received for that line. Base unit ringer volume Base Unit Make sure the base unit is not being used.

  • Page 25: Ringer Tone

    • If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 4). If you select a melody pattern, you will not be able to distinguish lines by their ringers.

  • Page 26

    Programmable Settings Base unit ringer tone Base Unit Make sure the base unit is not being used. Select either line by pressing [LINE SELECT] until “LINE 1” or “LINE 2” is announced. • The selected line ( LINE 1 • Do not select both lines. You cannot set the ringer for both lines at the same time.

  • Page 27: System, Greeting Message

    Preparing the Answering System Greeting Message You can record a personal greeting message of up to 2 minutes for each line or a common greeting message for both lines. If you do not record your own message, one of 2 pre-recorded greetings will be played for callers (p. 28). The total recording time of all messages (greeting, incoming and memo) is about 60 minutes.

  • Page 28

    Preparing the Answering System • If “ ” is displayed, 6 beeps sound and “Your greeting was not recorded. Record your greeting again.” is announced, start again from step 1. To review the greeting 1. Select the line(s) by pressing [LINE SELECT]. 2.

  • Page 29: Caller's Recording Time

    Preparing the Answering System Caller’s Recording Time You can select “1 minute”, “2 minutes”, “3 minutes” or “Greeting only” for the caller’s recording time. Each line has its own setting. The factory preset for both lines is “3 minutes”. Press [MENU]. Scroll to “Initial setting”...

  • Page 30: Number Of Rings

    Preparing the Answering System Number of Rings You can select the number of times the unit rings before the Answering System answers a call, from “2” to “7” or “Toll saver”*. Each line has its own setting. The factory preset for both lines is “4”. Press [MENU].

  • Page 31: Recording Mode, Message Alert

    Preparing the Answering System Recording Mode Handset 2 recording modes are available. The factory preset is “Standard recording (60 min)”, which provides more recording time (60 min) and standard sound quality. “Enhanced recording (30 min)” provides less recording time (30 min) but clearer sound quality. Press [MENU].

  • Page 32: Making Calls, Using The Handset

    Making Calls System capabilities 2 outside calls can be handled simultaneously on separate telephone lines by the handset and the base unit. Using the Handset Press [C]. • A free line is automatically selected and the line is displayed. (To change the line selection, see page 62.)

  • Page 33

    Hands-free Digital Duplex Speakerphone For best performance, please note the following: • Talk alternately with the other party in a quiet room. • If you or the other party has difficulty hearing, press [d] to decrease the speaker volume. • While talking using [C], or a line soft key ( to a hands-free phone conversation by pressing [s].

  • Page 34

    Making Calls To redial using the redial list (Memory Redial) The last 5 phone numbers dialed are stored in the redial list. 1. Press [REDIAL/PAUSE]. • The last number dialed is displayed. 2. Scroll to the desired number by pressing [d] or [B]. •...

  • Page 35

    (p. 16). Voice Enhancer Technology Panasonic’s Voice Enhancer Technology clarifies the voice of the person you are talking to, reproducing a more natural-sounding voice that is easier to hear and understand. Voice Enhancer Technology can be turned on or off. The factory preset is OFF.

  • Page 36: Using The Base Unit

    Making Calls When the handset is not in use, you can also turn this feature on or off by performing the following steps: 1. Press [MENU] while the handset is not in use. 2. Scroll to “Voice enhancer” by pressing [d] or [B], then press the soft key SELECT 3.

  • Page 37

    To redial the last number dialed Press [SP-PHONE] or a line button, then press [REDIAL/PAUSE]. To put a call on hold Press [HOLD] during a conversation. • The line button flashes. To return to the call, press the line button that is flashing. •...

  • Page 38: Answering Calls

    When a call is received, the unit rings, “Incoming call” and the called line are displayed, and the Ringer/Message Alert indicator on the handset and the line button on the base unit flash rapidly. 2 calls can be handled simultaneously on separate telephone lines by the handset and the base unit. Handset Press [C] or [s].

  • Page 39: Using The Other Line During A Conversation

    Using the Other Line During a Conversation When a call is being received on the other line during a conversation, you will hear 2 tones. The line button will flash rapidly on the base unit. You can answer the second call while holding the first call. You can also make a call without terminating the first call.

  • Page 40: Caller Id Service

    Caller ID Service This unit is compatible with Caller ID services offered by your telephone company. If you subscribe to Caller ID, caller names and phone numbers will be displayed and recorded in the Caller List. How Caller ID information is displayed When a call comes in, the unit will ring and Caller ID information will be received.

  • Page 41: Using The Caller List, Viewing The Caller List

    Using the Caller List The unit can record information up to 50 different callers for both lines combined and store this information in the Caller List. Caller information is sorted by the most recent call to the oldest. When the 51 call is deleted.

  • Page 42: Caller List

    Using the Caller List What “ ” and “ ” mean Indication of which line the caller information was received from. What “ ” means “Q” indicates you have already viewed this calling information or answered the call. If the same caller calls again, the call entry with the “Q”...

  • Page 43: Number

    Area code Phone no. – • The order in which patterns F–H are displayed depends on how the telephone number is displayed in step 2. To call the edited number, press [C], [s], or a line soft key ( or ( LINE2 •...

  • Page 44: Caller Id Number Auto Edit

    Using the Caller List Caller ID Number Auto Edit Once you call back an edited number (p. 43), this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call. For example, it can ignore the area code of calls originating from your area code, so that you can call these numbers from the Caller List without dialing the area code.

  • Page 45: In The Phone Book, Erasing Caller Information

    Storing Caller Information in the Phone Book Caller names and phone numbers that are in the Caller List can be stored in the phone book. Press [d] or [B] to enter the Caller List. Scroll to the desired caller by pressing [d] or [B]. Press the soft key ( SAVE •...

  • Page 46: Phone Book, Storing Names And Numbers

    • To store numbers for calling card access (see “Chain Dial” on page 49), we recommend you add pauses after each item. Storing pauses with numbers will prevent misdialing (p. 58). The delay time necessary will depend on your telephone company. Handset ), then press the soft...

  • Page 47: Dialing From The Phone Book

    Selecting characters to enter names Enter names using the dialing buttons. Press each button until the desired character is displayed. • Pressing each button selects a character in the order shown below. Keys Characters # & ’ ( ) ; , – . / 1 a b c A B C 2 d e f D E F 3 g h i G H I 4...

  • Page 48

    Items are sorted in the following order: Alphabet letters (Alphabetical) Space & ’ ( ) , – . / Numbers 0 to 9 Telephone numbers (If no name is stored) Press [C] or [s]. Press the soft key ( CALL LINE2 •...

  • Page 49: Chain Dial

    Chain Dial Handset You can dial a combination of phone book or manual key pad entries while making a call. This feature can be used, for example, to first automatically dial a calling card access number that you have stored in the phone book, then manually or automatically dial your PIN and then automatically dial the destination number from the phone book.

  • Page 50

    Phone Book Editing an Item in the Phone Book Press the soft key ( SEARCH Scroll to the desired item by pressing [d] or [B]. • To search for the item by initial, see page 48. Press the soft key ( Edit the name (p.

  • Page 51: Speed Dialer, Storing Phone Numbers, Number

    Speed Dialer Storing Phone Numbers You can store up to 10 phone numbers in the base unit. The dialing buttons ([0] to [9]) function as memory stations. Make sure the base unit is not being used. Press [PROGRAM]. • The IN USE indicator flashes and “ ” is displayed.

  • Page 52: Intercom, Making Intercom Calls

    Intercom Intercom calls can be made between the handset and the base unit. Making Intercom Calls From Handset Press [HOLD/INTERCOM]. • The paged unit will ring for 1 minute. • To stop paging, press [OFF]. When the paged party answers, start talking. •...

  • Page 53: Answering Intercom Calls

    Answering Intercom Calls Handset When the handset is paged, it rings and the Ringer/Message Alert indicator flashes rapidly. Press [C], [s] or [HOLD/INTERCOM]. • You can also answer a page by pressing any button except [d], [B] or [OFF]. To disconnect the intercom, press [OFF]. •...

  • Page 54: Transferring A Call

    Transferring a Call You can transfer an outside call to the base unit or the handset. From the Handset to the Handset: (1) During a call, press [HOLD/INTERCOM]. • “ ” or “ LINE1 LINE2 put on hold. (2) To page the base unit, press [0]. (3) Wait for the paged party to answer, then you can announce the transfer.

  • Page 55

    Quick call transfer You can transfer a call without waiting for the paged party to answer. Handset From the to the 1. During a call, press [HOLD/INTERCOM]. 2. Press [0]. 3. Press [OFF] to hang up. Base Unit From the to the 1.

  • Page 56: Conference Calls

    Conference Calls Conference call with 2 outside calls While you are talking with an outside caller, you can make or answer a second call on the other line, and then combine the calls to establish a conference call. Handset During a call, press [HOLD/ INTERCOM] 2 times to put the first call on hold.

  • Page 57: Call Share

    Conference with an outside call and an intercom call While you are talking with an outside caller, another user can join the conversation using the handset or the base unit and establish a conference call. Handset During a call, press [HOLD/ INTERCOM].

  • Page 58: Special Features, Muting Your Conversation, Call Privacy

    Special Features Muting Your Conversation During a call, you can mute your phone so the other party cannot listen to you. When muting your conversation, you can hear the other party. Handset Press the soft key ( • “Mute” will be displayed for a few seconds and “ •...

  • Page 59: Users

    “Waiting” and the line. • Contact your telephone company for details about availability in your area, and to verify that CWID service is activated on your telephone line.

  • Page 60: Flash Button

    Handset Base Unit Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. • Pressing [FLASH/CALL WAIT] cancels the mute (p. 58) or the Temporary Tone Dialing mode (p.

  • Page 61: Incoming Call Tone

    Incoming Call Tone During an outside call, you can be informed of another incoming call on the other line. During an intercom call (p. 52), you can also be informed of incoming calls by 2 tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing.

  • Page 62: Line Selection

    Special Features Line Selection When you make or answer a call, the handset and base unit can automatically select the line when you press [C] or [s] on the handset or [SP-PHONE] on the base unit. There are 3 types of line selection. You can change the line selection for the handset and base unit separately.

  • Page 63: Key Tone

    Base unit line selection Press [MENU]. Scroll to “Initial setting” by pressing [d] or [B], then press the soft key ( Scroll to “Set base unit” by pressing [d] or [B], then press the soft key ( Scroll to “Line selection” by pressing [d] or [B], then press the soft key ( Select “Line1”, “Line2”...

  • Page 64: Re-registering The Handset

    Special Features Re-registering the Handset If “No link to base. Move closer to base and try again.” is displayed even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to that base unit.

  • Page 65: Operation, Calls

    Automatic Answering Operation The Answering System allows the unit to answer calls with a greeting message. Callers can then leave a message. When turning the Answering System on, you can select the lines it will answer calls from. • The total recording time of all messages (greeting, incoming and memo) is about 60 minutes (about 30 minutes in “Enhanced recording”...

  • Page 66: Monitoring Incoming Calls

    Automatic Answering Operation To turn off the Answering System Press [ANSWER ON]. • The indicator light goes out, and the unit announces “Answer off”. • To turn the Answering System off for one line when both lines are turned on, select the line which you want to leave on by pressing [LINE SELECT], then press [ANSWER ON].

  • Page 67: Listening To Messages, Using The Base Unit

    Listening to Messages Voice Day/Time Stamp: During playback, the unit will announce the day and time when each message was recorded (p. 19). The unit will indicate that new messages have been recorded in the following ways: — The NEW MESSAGE indicator flashes on the base unit. —...

  • Page 68

    Listening to Messages • If a call is received during playback, the unit rings and playback stops. To answer the call, press the called line button. For playback, start again from the beginning after hanging up. • If 65 or more new messages have been recorded, the unit will not announce the number of new messages during playback.

  • Page 69

    To play back messages for the desired line(s) 1. Press the soft key ( SEARCH 2. To listen to messages for LINE 1, press [#][1]. To listen to messages for LINE 2, press [#][2]. To listen to messages for LINE 1 and LINE 2, press [#][0]. •...

  • Page 70

    Listening to Messages For Caller ID service users (p. 40) During playback, the handset display shows the name and/or number of the caller whose message is being played. To call the displayed number: 1. Press the soft key ( CALL •...

  • Page 71: Erasing Messages

    Erasing Messages The unit will announce the remaining recording time after playback if it is less than 10 minutes. New messages cannot be recorded when: — “Memory full” is heard. — “ ” flashes on the base unit. FULL — ANSWER ON indicator flashes rapidly (when the Answering System is on). Erase unnecessary messages.

  • Page 72: Message

    Erasing Messages Handset Press the soft key ( SEARCH Press [*][5] to erase all messages. Wait until “No messages” is heard. • While erasing messages, alarm tones will be heard. • All messages for the line(s) and memo messages are erased. •...

  • Page 73: Answering System, Remote Operation From A

    Transferring a Call to the Answering System Handset When you answer a call and the caller wants to talk to someone who is not available, you can transfer the caller to the Answering System, where the caller can leave a message. Tell the outside caller you will transfer him or her to the Answering System.

  • Page 74: Touch Tone Phone

    Remote Operation from a Touch Tone Phone While outside, you can operate the Answering System from any touch tone phone. A synthesized voice menu will guide you through the Answering System (p. 76). • To skip the voice menu and operate the unit directly, see page 77.

  • Page 75: Remote Code

    Remote Operation from a Touch Tone Phone Remote Code Handset The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00–99) for your remote code. The factory preset remote code is “11”. If you do not program your own remote code, you can use “11”.

  • Page 76: Voice Menu

    Remote Operation from a Touch Tone Phone Voice Menu The shaded parts are voice prompts. Press 1 to play back all messages. Press 2 for other functions. Press [2]. Press 1 to play back new messages. Press 2 for other functions. Press [2].

  • Page 77: Direct Remote Operation, For Assistance, Please Call: 1-800-211-pana(7262

    • The Answering System will be turned on. Hang up or enter the remote code for other options. • When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options.

  • Page 78: Wall Mounting

    This unit can be mounted on a wall phone plate. Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the telephone line cord (B). Insert the hooks on the wall mounting adaptor into the holes ( ) on the base unit.

  • Page 79

    Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. Connect the telephone line cord. Mount the unit, then slide it down. • Raise the antennas. To charge the handset battery: Place the handset on the base unit.

  • Page 80

    Wall Mounting To remove the wall mounting adaptor While pushing down the RELEASE LEVERS (A), remove the adaptor (B). RELEASE LEVERS...

  • Page 81: Belt Clip, Optional Headset

    To attach the belt clip Optional Headset Connecting an optional headset to the handset allows hands-free phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories telephone number on page 2.

  • Page 82: Direct Commands

    Direct Commands Handset After pressing [MENU], you can also program menu items directly by pressing ([0] to [9], [*] and [#]) instead of using the soft keys. Menu item Ringer volume Line 1 [1] [1] [1] (Handset) Line 2 [1] [1] [2] Ringer tone Line 1 [1] [2] [1] (Handset)

  • Page 83

    Menu item Change language Message alert Ringer tone Line 1 [0] [*] [1] [1] [1]–[4] : Tone pattern 1–4 (Base unit) Line 2 [0] [*] [1] [2] Incoming call tone (Base unit) Line selection (Base unit) Ringer volume Line 1 [0] [*] [6] [1] [1] : Low [2] : Medium (Base unit) Line 2 [0] [*] [6] [2] Handset registration...

  • Page 84: Your Display

    If the Following Appear on Your Display... The following will be displayed on the handset when the unit needs your attention. Display message Recharge battery Charge for 6 HRS No link to base. Move closer to base and try again. Please lift up and try again.

  • Page 85: Troubleshooting

    • Raise the base unit antennas. • Turn on the Clarity Booster feature (p. 35). • If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations. We...

  • Page 86: Button (p

    • If the unit is connected to a telephone line with DSL service, the unit may not display caller’s name and/or phone number properly. We...

  • Page 87

    Problem The handset cannot automatically edit the Caller List/incoming phone numbers. The handset display exits the Caller List or phone book. The Ringer/Message Alert indicator flashes slowly when the handset is not ringing and in use. You cannot have a conversation using the headset.

  • Page 88

    Troubleshooting Answering System Problem The Answering System is on, but incoming messages are not recorded. “ ” flashes and the FULL ANSWER ON indicator flashes rapidly. No new messages are recorded. You cannot operate the Answering System from the base unit or the handset. You cannot operate the Answering System from a touch tone phone.

  • Page 89

    • The battery may need to be replaced. If you install a new battery, fully charge it (p. 15, 16). • This is normal. • Visit our website: http://www.panasonic.com/consumersupport • Contact us via the web at: http://www.panasonic.com/contactinfo • Call our customer call center at:...

  • Page 90: Instructions

    Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this unit. 3.

  • Page 91: Fcc And Other Information

    Registration No..(found on the bottom of the unit) Ringer Equivalence No. (REN) ...0.2B A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.

  • Page 92

    FCC and Other Information If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible.

  • Page 93

    • If there is any trouble — disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your telephone company.

  • Page 94: Specifications

    AC adaptor (120 V AC, 60 Hz) Standby: Approx. 2.7 W Maximum: Approx. 6.5 W 5.76 GHz – 5.84 GHz " x 9 Approx. 520 g (1.15 lb.) Tone (DTMF)/Pulse Participant, Panasonic has NERGY NERGY TAR is a " x 1 ") " x 5 ")

  • Page 95: Warranty

    Panasonic Services Company Customer Servicenter 4900 George McVay Drive Suite B Door #12 McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)- 768-2910. For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Call Center at 1-800-211-PANA (7262).

  • Page 96

    Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Accessory Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com...

  • Page 97: Index

    Installation, AC adaptor ..11 Installation, battery... . . 15 Installation, telephone line cord ....12, 13 Intercom call .

  • Page 98

    System ..... 88 Troubleshooting, general ..89 Troubleshooting, Telephone System ..... 85 TTY .

  • Page 100

    Symptom • Send the unit to an authorized servicenter, prepaid and adequately insured. • Do not send your unit to the Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: