Panasonic KX-TG5480 Operating Instructions Manual page 24

Programmable Settings
Temporary ringer off
While the handset is ringing, you can turn the ringer off temporarily by pressing
[OFF]. The handset will ring again the next time a call is received for that line.
Base unit ringer volume
Base Unit
Make sure the base unit is not being used.
1
Select either line by pressing [LINE SELECT]
until "LINE 1" or "LINE 2" is announced.
• The selected line (
• Do not select both lines. You can not set the
ringer for both lines at the same time.
2
To set the ringer volume to high (preset), medium, or low, press
[d] or [B].
• To increase volume, press [B]. To decrease volume, press [d].
• To change the ringer tone, press [<] or [>] (p. 26).
• To stop ringing, press [STOP].
To turn the ringer off, press and hold
• " L 1 " or " L
To turn the ringer on, press [d] or [B] in step 2.
• The base unit will ring at the low level for the line.
• You can adjust the base unit ringer volume while the line is ringing.
Press [d] or [B] while the line is ringing.
To turn the ringer off, press and hold [d] until 2 beeps sound. "
displayed.
Selecting the base unit ringer volume by using the
1
Press [MENU].
2
Scroll to "Initial setting" by pressing [d] or [B], then press the
soft key (
SELECT
3
Scroll to "Set base unit" by pressing [d] or [B], then press the
soft key (
SELECT
4
Press the soft key (
5
Follow steps 4 to 7 of "Handset ringer volume" on page 23.
• When selecting the ringer volume, the base unit will ring.
24
(use either the base unit or the handset)
or
LINE 1 LINE 2
2
" is displayed.
).
).
) at "Ringer volume".
SELECT
Ex. LINE 1 selected.
) is displayed.
until 2 beeps sound.
[d]
Handset
1
LINE LINE
2
L 1 " or " L " is