Dsc Task Mode (Single) - Icom IC-M605E Instruction Manual

■ DSC Task mode (Single)

After sending or receiving a DSC call, the
transceiver enters the DSC Task mode.
(Example: After transmitting an Individual call)
In the Task mode, you can resend the
call, or send an acknowledgement to the
caller station, and so on.
NOTE: The Task mode has a Time-out
Timer (TOT) function. When you push no key
for a preset period of time, the transceiver
automatically exits the Task mode.
A count down alarm sounds 10 seconds
before the TOT activates.
No count down alarm sounds before Radio
Telephone TOT activates. You can set the
TOT function in the INACTIVITY TIMER
menu. (p. 86)
The default settings of the TOT function:
• Distress call: OFF
• Non-Distress call: 15 minutes
D Software key functions
When entering the Task mode, the
following functions are displayed first.
FUNCTION DESCRIPTION
Standby Push to delete the task and
returns to the Main screen.
Resend Push to resend the call.
The following functions may be
displayed, depending on the call type.
FUNCTION DESCRIPTION
Cancel Push to send a Cancel call.
Pause Push to pause the 'Call repeat'
mode, or pause the countdown.
Resume Push to resume the countdown.
Finish Push to exit the Distress cancel
statement screen.
History Push to display the Distress call
history screen.
ACK/ Push to send an
ACK (able) acknowledgment without any
changes.
ACK Push to send an
(Unable) acknowledgment, but you
cannot make a communication.
ACK Send an acknowledgment.
(New CH) You can specify the Voice
Communication channel.
DSC OPERATION
D Unread List
If the transceiver has unread DSC calls,
you can enter the UNREAD LIST menu
by pushing [Unread List]
L Push [Active] to enter the task
mode.
L Push [Info] to display the detail of
selected task.
8
1
2
3
4
.
5
6
7
8
9
10
11
12
13
14
15
16
29