Table of Contents
Advertisement
D Channel Auto Switch
By regulation, after receiving a DSC
call, the transceiver changes the
operating channel to the channel
assigned by the received DSC call.
However, when this setting is set
to "OFF," the function enables the
transceiver to remain on the operating
channel, even after receiving a Distress
call.
1.
Push [MENU].
2. S elect "CH Auto Switch:," then
push [ENT].
( D SC Settings > CH Auto Switch:)
3. Select the option, then push [ENT].
Accept after 10 sec.
After receiving a DSC call, the
transceiver remains on the current
operating channel for 10 seconds.
After that, the transceiver automatically
switches to the channel that assigned
by the received DSC call.
Ignore after 10 sec.*
After receiving a DSC call, the
transceiver remains on the current
operating channel for 10 seconds.
After that, the transceiver automatically
returns to the Main screen.
Hold after 10 sec.*
Rotate
After receiving a DSC call, the
transceiver remains on the current
operating channel for 10 seconds.
+
Push
After that, the transceiver automatically
holds the received DSC call and
returns to the Main screen.
Manual
The user need to select whether or not
to accept the received DSC call.
*
*
4.
P ush [Exit]
Main screen.
1
2
DSC OPERATION
1
D isplayed only when "Single" is
selected in the PROCEDURE menu.
(p. 64)
2
D isplayed only when "Multiple" is
selected in the PROCEDURE menu.
(p. 64)
to return to the
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
61
Advertisement
Table of Contents
