Table of Contents
Advertisement
8
DSC OPERATION
■ Sending a Non-Distress call (Continued)
D Sending a Polling Reply call (For only the USA version)
Send a Polling Reply call when a
Polling Request call is received.
1.
When a Polling Request call is
received:
• Alarm sounds.
2. Push any [Alarm Off]
3. Push [Accept]
• Enters the DSC Task mode.
44
4.
Push [ACK]
.
.
• The call contents screen is displayed.
L Rotate [CH/ENT] to view the call
5. Push [Call]
call.
6. Push [Standby]
Push
the Main screen.
TIP: When "Polling ACK" is set to
"Auto," the transceiver automatically
sends the call.
.
Push
contents.
to send the Reply
to return to
D Sending a Test call
Testing on the exclusive DSC distress
and safety calling channels should be
avoided as much as possible by using
other methods.
Normally the Test call would require no
further communications between the
two stations involved.
1.
Push [Compose Other]
display the COMPOSE NON-
DISTRESS screen.
L To display the screen from the Menu
screen:
([MENU] > Compose Non-Distress)
2. Select "Message Type," then
push [ENT].
3. Select "Test."
4.
Select "Address," then push [ENT].
to
Rotate
+
Push
Advertisement
Table of Contents
