Selecting The Dialing Mode; Base Unit - Panasonic KX-TG2000B Operating Instructions Manual

Selecting the Dialing Mode

If your lines have touch tone service, set to "Tone". If rotary or pulse
service is used, set to "Pulse". Select the mode for each line. Your phone
comes from the factory set to "Tone".
Make sure that the base unit is in the standby mode.
1
Press
(FUNCTION)
2
Press or
points to "Dial setting", and
press H.
3
While "Set dial mode" is at
the arrow, press H.
• The current settings are displayed.
D i a l m o d e
L i n e 1
T o n e
4
Select "Puls" (Pulse) or "Tone"
by pressing
line. To move to the other line,
press H or I.
.
until the arrow
L i n e 2
T o n e
or for each

Base Unit

5
Press
(ENTER)
• A beep sounds.
• To return to the standby mode,
press (EXIT).
.
21