Selecting The Dialing Mode - Panasonic KX-TC1851CB Operating Instructions Manual

Selecting the Dialing Mode

If you have touch tone service, set to "Tone". If rotary or pulse service is
used, set to "Pulse". Your phone comes from the factory set to "Tone".
Make sure the handset is in the standby mode.
(FUNCTION/EXIT/CH)
1 Press
(›) (‹)
2 Press or
points to "Program".
FWD/EDIT (fl)
3 Press
(›) (‹)
4
Press or
points to "Set dial mode".
FWD/EDIT (fl)
5 Press
(›) (‹)
6 Press or
FWD/EDIT (fl)
"Tone". Press
≥A beep sounds.
≥To return to the standby mode, press
(FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
.
repeatedly until the arrow
(Yes key).
repeatedly until the arrow
(Yes key).
to select "Pulse" or
(Save key).
"
1Save directory
Voicemail dial
1=Yes
4 3
Ringer volume
1Program
1=Yes
4 3
1Change language
Set flash time
1=Yes
4 3
Set line mode
1Set dial mode
1=Yes
4 3
Dial mode
:Tone
1=Save
4 3
Dial mode
:Pulse
15