Table of Contents
Advertisement
Selecting the Dialing Mode
You can program the dialing mode by using the handset near the base
unit. If you have touch tone service, set to TONE. If rotary or pulse
service is used, set to PULSE. The factory preset is TONE.
The TALK and DIGITAL SP-PHONE indicator lights must be off
before programming.
uole
1 Press (PROGRAM/2WAY
REC).
@The TALK indicator flashes.
? Press (AUTO).
3 To select PULSE, press [x] twice.
OR
To select TONE, press (x*] twice.
4 When finished, press
PROGRAM/2WAY
REC).
eA confirmation tone sounds.*
PROGRAM/2WAY REC
eTo cancel during programming, press (PROGRAM/2WAY
REC), then start
from step 1.
elf 3 beeps sound during programming, a wrong key was pressed.
Restart from step 1.
*What the confirmation tone means
1 beep:
The mode is different from the previously selected one.
2 beeps: The mode is the same as the previously selected one.
If a power failure occurs, the mode will return to the factory preset a
i (TONE). Reprogram if necessary.
Il
Advertisement
Table of Contents
