Selecting The Dialing Mode - Panasonic KX-TC1851B Operating Instructions Manual

Selecting the Dialing Mode

You can program the dialing mode by using the handset near the base unit.
If you have touch tone service, set to TONE. If rotary or pulse service is used,
set to PULSE. Your phone comes from the factory set to TONE.
Make sure that the handset is in the stand-by mode.
(FUNCTION/EXIT)
1 Press
(›) (‹)
2 Press or
(ENTER/CH)
3 Press
(›) (‹)
4
Press or
(ENTER/CH)
5 Press
(›) (‹)
6 Press or
≥A beep sounds.
≥The display will return to the function list. To return to the stand-by mode,
(FUNCTION/EXIT)
press
≥You can exit the programming mode any time by pressing
.
repeatedly until the arrow points to "Program".
(fl)
or FWD/EDIT .
repeatedly until the arrow points to "Set dial mode".
(fl)
or FWD/EDIT .
to select "Pulse" or "Tone". Press
or wait for 60 seconds.
– 7 –
(ENTER/CH)
.
(FUNCTION/EXIT)
.