Omron sysmac FH Series Hardware Setup Manual page 61

Sensor Controller Series
Type
Sensor Controller Model
Serial Communication
Ethernet Protocol
Communi-
I/F
cation
EtherNet/IP Communica-
tion
EtherCAT Communication
Parallel I/O
External
Interface
Encoder Interface
Monitor Interface
USB I/F
SD Card I/F
Main
Ethernet
Indicator
Lamps
SD Card
EtherCAT
Power-supply voltage
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
FH-3000 series
High-speed Controller (4 cores)
FH-3050 FH-3050-10 FH-3050-20
RS-232C × 1
Non-procedure (TCP/UDP)
1000BASE-T × 1 1000BASE-T × 2
Ethernet port (transmission rate: 1Gbps)
Yes (slave)
• 12 inputs/31 outputs:
• Use 1 Line.
• Operation mode: Except Multi-line random-trigger mode.
• 17 inputs/37 outputs:
• Use 2 Lines.
• Operation mode: Multi-line random-trigger mode.
• 14 inputs/29 outputs:
• Use 3 to 4 Lines.
• Operation mode: Multi-line random-trigger mode.
• 19 inputs/34 outputs:
• Use 5 to 8 Lines.
• Operation mode: Multi-line random-trigger mode.
Input voltage: 5 V ± 5%
Signal: RS-422A LineDriver Level
Phase A/B/Z: 1 MHz
DVI-I output (Analog RGB & DVI-D single link) × 1
USB2.0 host × 4 (BUS Power: Port5 V/0.5 A)
SDHC × 1
POWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
NET RUN: NET RUN1: Green
Green
NET LINK ACK1: Yellow
NET LINK
NET RUN2: Green
ACT: Yellow
NET LINK ACK2: Yellow
SD POWER: Green
SD BUSY: Yellow
EtherCAT RUN LED: Green
EtherCAT LINK/ACT IN LED: Green
EtherCAT LINK/ACT OUT LED: Green
EtherCAT ERR LED: Red
20.4 VDC to 26.4 VDC
3 Configuration
FH-1000 series
Standard Controller (2 cores)
FH-1050 FH-1050-10 FH-1050-20
1000BASE-T × 1 1000BASE-T × 2
NET RUN: NET RUN1: Green
Green
NET LINK ACK1: Yellow
NET LINK
NET RUN2: Green
ACT: Yellow
NET LINK ACK2: Yellow
3
3 - 3