Operating Timing Of The Feed - JUKI LZ-2290C-F Instruction Manual

5-4-2. Operating timing of the feed

When you have changed the stitch length, feed dog height or feed timing, run the sewing
machine at a low speed to make sure that the gauge does not interfere with the changed part.
❷
Needle
1. The feed timing differs with the set value. (Image figure as observed from the face plate side)
2. The stitch length changes by adjusting the feed timing. Carry out adjustment while actually
carrying out sewing for the purpose of checking the stitch length.
❶
❺
❸ ❹
Standard : 0
Adjust with the + key
Timing between the needle and feed can be ad-
justed on the operation panel.
[How to adjust]
1) Display the sewing data edit screen by press-
ing
2) Display "S069 Feed timing" by pressing
❷ .
3) Change the feed timing by pressing ten keys
and
(+ : To advance; - : To retard)
4) Confirm your entry by pressing
5) Display the sewing screen by pressing
❺ .
* Range of input values on the panel is from
-30 to 30.
To advance :
Adjust with the - key
– 101 –
❶ .
❸ .
To retard:
❹ .