JUKI LZ-2290C-F Instruction Manual page 161

❹
<Registered cycle pattern selection screen
(In numerical order)>
<Cycle sewing pattern edit screen>
❽ ❾
<Cycle sewing pattern number registration screen>
❺
❼ ❻

– 156 –
3) Press Pattern No. ❹ you want to create.
❺ is pressed, the operation is
4) When
confirmed. Then, the screen returns to the
"new cycle sewing pattern edit screen".
5) The selected pattern is added to cycle sewing
data with suffixed.
Create the cycle sewing data by repeating
steps 2) to 5).
❻ to display the data discard
6) Press
confirmation screen.
❼ is pressed, the "cycle sewing
7) When
pattern number registration screen" is dis-
played.
8) Enter the sewing pattern number to be regis-
tered using numeric keypad ❽ .
An unassigned registration number that is
closest to the entered value in the plus/minus
direction is displayed by pressing
❾ .
9) The created pattern is registered by pressing
 .
Then, the current screen returns to the "sew-
ing pattern number list screen". In the case
the entered number has already been reg-
istered, the prompt message for overwrite
confirmation is displayed.