JUKI LZ-2290C-F Instruction Manual page 57

・ Inputting the stitch length (reverse feed) (B)
<Stitch length (reverse feed) input screen>
・ Inputting the sewing speed for the reverse feed stitching at the beginning of sewing (C)
<Sewing speed for reverse feed stitching input screen>
・ Setting the needle thread tension function (D)
<Needle thread tension function selection screen>
<Sewing-start reverse feed stitching data edit screen>
 
 
 

1) When
(reverse feed) input screen" is displayed.
2) Enter the stitch length (reverse feed) with
numeric keypad  . (-2.5 to 2.5)
3) When
have input is confirmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
1) When
speed for reverse feed stitching input screen"
is displayed.
2) Input a sewing speed with numeric keypad  .
(150 to 2000)
3) When
have input is confirmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
1) When
thread tension function selection screen is
displayed.
2) Select the status (enable/disable) of the nee-
dle thread tension function with button  .
3) When
have input is confirmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
* In the case
aforementioned item number 2, needle thread
tension edit button
the sewing-start reverse feed stitching data
edit screen.
– 52 –
B is pressed, the "Stitch length
 is pressed, the value you
C is pressed, the "Sewing
 is pressed, the value you
D is pressed, the needle
 is pressed, the value you
(enable) is selected in the
 is displayed on