Introduction; Requirements; Features - Motorola MVME162FX Programmer's Reference Manual

The IndustryPack Interface Controller (IP2 chip) ASIC provides
control and status information, including DMA control, for up to
four single-size IndustryPacks (IPs) or up to two double-size IPs
that can be plugged into the MVME162FX main module.

Requirements

These boards are designed to conform to the requirements of the
following documents:

Features

VMEbus Specification (IEEE 1014-87)
EIA-232-D Serial Interface Specification, EIA
SCSI Specification, ANSI
IndustryPack Specification, GreenSpring
32MHz 32-bit MC68040 Microprocessor,
or 25MHz 32-bit MC68040 or MC68LC040 Microprocessor
4MB, 8MB, or 16MB of shared DRAM with no parity
protection
512KB of SRAM with battery backup
One JEDEC standard 32-pin PLCC EPROM socket (EPROMs
may be shipped separately from the MVME162FX)
One Intel 28F008SA 1M x 8 Flash memory device (1MB Flash
memory total)
8K by 8 Non-Volatile RAM and time-of-day clock with
battery backup
Four 32-bit Tick Timers (in the MC2 chip ASIC) for periodic
interrupts
Two 32-bit Tick Timers (in the VMEchip2 ASIC) for periodic
interrupts

Introduction

1
1-3