Table of Contents
Advertisement
Problem
2. The message below appears
• The message shows that the input signal is
out of the specified frequency range.
Example:
6-2. Imaging problems (for both digital and analog)
Problem
1. The screen is too bright or too dark
2. Characters are blurred
3. Afterimages appear
4. Green / red / blue / white dots or defective
dots remain on the screen
5. Interference patterns or pressure marks
remain on the screen
6. Noise appears on the screen
28
Chapter 6 Troubleshooting
Possible cause and remedy
This message appears when the signal is not input correctly
even when the monitor functions properly.
• Check whether the PC is configured to meet the resolution
and vertical scan frequency requirements of the monitor
(see "Compatible Resolutions" in the Setup Manual).
• Reboot the PC.
• Select an appropriate setting using the graphics board's
utility. Refer to the User's Manual of the graphics board
for details.
Possible cause and remedy
• Use "Brightness" or "Contrast" in the Setting menu to
adjust it. (The LCD monitor backlight has a limited life
span. When the screen becomes dark or begins to flicker,
contact your local EIZO representative.)
• Check whether the PC is configured to meet the resolution
and vertical scan frequency requirements of the monitor
(see "Compatible Resolutions" in the Setup Manual). For
information on how to change your PC settings, please
visit our website (www.eizoglobal.com).
• When an image is displayed with a resolution other than
recommended, the characters or lines of the displayed
image may blur. Use "Smoothing" and "Screen Size" in
the Setting menu to adjust the display (see
blurred characters / lines" (page
Changing" (page
18)).
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
• Use the screen saver or power save function to avoid
displaying the same image for extended periods of time.
• This is due to LCD panel characteristics and is not a
failure.
• Leave the monitor with a white or black screen. The
symptom may disappear.
• When entering the HDCP signals, the normal images may
not be displayed immediately.
"To modify
17), and
"Screen Size
Advertisement
Table of Contents
