Adjustments; Electrical/Image Adjustment; Accessing The Service Mode; Accessing The "Adjust" Menu - Konica Minolta Di1610 Service Manual

4.

ADJUSTMENTS

4-1.

Electrical/Image Adjustment

(1)

Accessing the Service Mode

1. Press the Utility key.
2. Press the following keys in order to enter the Service mode.
Stop → 0 → 0 → Stop → 0 → 1
NOTE
• Be sure to keep the access procedure for the Service mode from any unauthorized per-
sons not involved with service operations.
(2)

Accessing the "ADJUST" Menu

1. Enter the Service mode.
2. Press the L or M key to select the "ADJUST" menu.
(3)

Printing a Test Page

NOTE
• Print a test page when making the following adjustments.
• Leading edge tilt adjustment
• Automatic Document Feeder sub-scanning zoom ratio adjustment
• Automatic Document Feeder main scanning & sub-scanning registration adjustments
1. Enter the Service mode.
2. Press the L or M key to select the function.
3. Select "PRINT TEST PATTERN" → "TEST PATTERN 1".
4. Press the Start key to begin printing the test page.
D-9