Clean; Transporting The Device - Siemens WN44G240 User Manual

Table of Contents

Advertisement

de

Transporting the device

Drain hose on the siphon

clean

1.
Switch off the device.
2.
Disconnect the device's power plug
from the mains.
3.
Loosen the hose clamp and carefully
pull off the drainage hose.
Note:
Residual water can run out.
4th
Clean the drain hose and siphon
socket.
5.
Reattach the drain hose and secure the
connection point with a hose clip.
54
L.
Transporting the device
he follows prepared for transport
Device w en:
Transporting the device
1.
Close the tap.
2.
Reduce the water pressure in the
inlet hose.
3.
Switch off the device.
4th
Disconnect the device's power plug from
the mains.
5.
Remaining detergent solution
drain. ~ " Empty and clean the drain
pump "on page 52
6th
Remove the hoses.
Install transport locks as follows:
1.
Remove cover caps and keep. Use a
screwdriver if necessary.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wn44g290

Table of Contents