Remove laundry / appliance
switch off
1.
Open the program selector Û ( The end)
to adjust.
2.
Open the washing machine door and
remove the laundry.
3.
Turn off the tap.
Note:
This is not necessary with
AquaStop models.
Hints
Do not leave any items of laundry in
■
the drum. They can shrink during the
next wash or discolour other items of
laundry.
Remove foreign bodies from the drum
■
and the rubber sleeve because of the
risk of rust.
Wipe the rubber sleeve dry.
■
Leave the washing machine door and
■
detergent drawer open so that any
residual water can evaporate. Always
wait for the program to end as the
■
appliance may still be locked. Then
switch on the device and wait for it to
unlock.
Device settings
Q
Device settings
The following settings can be changed
F.
Device settings
be:
The end signal volume
■
The key signal volume
■
Switch the drum care information
■
signal on / off
To change these settings, the setting
mode must be activated.
1/2/3/4 ...
Program selector position
nen
Activate setting mode:
1.
Set the program selector to position 1.
The device is switched on.
2.
The key sling Hold down and at the
same time turn the program selector to
position 2 to the right. The key sling let
go.
The setting mode is activated and the
default setting appears on the display
panel.
de
43