Table of Contents
Advertisement
11.
Carefully unscrew the pump cover.
Note:
Residual water can run out.
12th
Clean the interior, the thread of the
pump cover and the pump housing.
Note:
The impeller of the detergent
solution pump must turn.
13.
Replace the pump cover and screw it
on.
Note:
The handle must be vertical.
Clean and maintain
14th
Insert service flap and click into place.
15th
Close the service flap.
16.
Open the tap. Plug in the mains plug
and switch on the device.
17th
1 liter of water in chamber II pour
and the program Pumping out Start.
This prevents unused detergent from
flowing into the drain during the next
wash.
You have successfully cleaned the drain
pump.
de
53
Advertisement
Table of Contents
