Table of Contents
Advertisement
de
Operate the device
Change program
If the wrong program has been started by
mistake, the program can be changed as
follows:
1.
The key Start reloading touch
ren.
2.
Select another program.
3.
The key Start reloading again
touch. The new program starts all
over again.
Note:
When drying is activated, after
touching the key Start reloading when
displaying Hot let the appliance run and
wait until the laundry has cooled down
enough that Hot
is no longer displayed. Then select a
different program.
Program termination
For washing programs with a high
temperature:
1.
The key Start reloading touch
ren.
2.
For cooling down the laundry Wash
choose.
3.
The key Start reloading touch
ren.
For washing programs at a low
temperature:
1.
The key Start reloading touch
ren.
2.
Spin / Drain choose.
3.
The key Start reloading touch
ren.
For programs in the drying process:
1.
The key Start reloading touch
ren.
2.
if Hot is displayed, let the appliance run
and wait until the laundry has cooled
down enough that
Hot is no longer displayed.
42
End of program
End lights up in the display and the
displays ~ and O are turned off.
If you select 2 only the water is pumped
out after the rinsing process, no spin cycle.
Hints
If in the display panel Hot flashes
■
before the drying program is finished,
the temperature in the drum is high.
The drum cool down program will run
until the temperature inside the drum
is reduced.
If the laundry is not done within 15
■
minutes of the
When the drying process is completed,
the anti-crease process starts to
prevent the laundry from creasing. The
process takes about 30 minutes. 0:00,
£ '˜, ̃ £ © en "Ÿš are displayed
alternately. In addition, the symbol O
displayed as a status symbol. This
process can be ended by touching any
key. The washing machine door is then
released and the laundry can be
removed.
Advertisement
Table of Contents
