Table of Contents
Advertisement
de
Set up and connect the device
Water inlet
:
warning
Risk of death!
Contact with live parts creates the risk of
electric shock. Immerse the Aquastop
safety
valve not in water (contains an electrical
valve).
Note:
Only operate the device with cold
tap water.
1.
Connect the water inlet hose to the tap
(26.4 mm = ¾ ").
2.
Carefully open the tap and check the
connection point for leaks.
Note:
The screw connection is under
water line pressure.
16
Drainage
:
warning
Risk of scalding!
When washing at high temperatures, you
may get scalded if you come into contact
with hot detergent solution, eg when
pumping hot detergent solution into a
wash basin.
Do not reach into the hot
detergent solution.
Caution!
Water damage
The drain hose is under high water
pressure when it is pumped out and can
slip out of the wash basin or the
connection point.
Secure the drain hose against slipping out.
Caution!
Device damage / damage to textiles
If the end of the drain hose is immersed in
the water that has been pumped out, water
can be sucked back into the device and
damage the device / textiles.
Make sure of the following:
The stopper must not block the sink
■
drain
The end of the drain hose must not be
■
immersed in pumped-out water
The water needs to drain quickly
■
Advertisement
Table of Contents
