Siemens WN44G240 User Manual page 25

H: 32 and "Ÿš
E: 35 and - 10
E: 36 and - 10
w
other displays / symbols
- - - - - - - -
Imbalance
failure
failure
Parental controls
flash alternately: Your device has detected an
imbalance. The spinning was canceled due to uneven
distribution of the laundry.
Distribute small and large items of laundry in the
■
drum.
Start the Spin program.
■
flash alternately: Water in the floor pan, your
device is leaking.
Close the tap.
■
Call customer service!
■
flash alternately: The drain pump or drain
hose / drain pipe is blocked.
Clogged drain pipe or water drainage hose.
■
Clean the drain pipe and the water drain hose.
The drain pipe or water drainage hose is
■
kinked or pinched. Make sure that the
drain pipe and the water drainage hose are
not kinked or pinched. The drain pump is
blocked.
■
~ " Empty and clean the drain pump "on
page 52
The drain hose on the siphon is blocked.
■
~ " Clean the drain hose on the siphon
"on page 54
The water drainage hose is connected too high.
■
Install the water drainage hose at a maximum
height of 1 meter.
~ " Hose and cable lengths "on page 15
shines: Child lock is activated
■
flashes: The panel cannot be operated.
■
Parental control is active.
Turn off the device. Wait 5
■
seconds. Turn the device
back on.
If the fault occurs repeatedly, call
■
customer service.
de
Display
25th