Oki C3000 Series Manual page 34

ITEM
OP MENU (cont.) FX EMULATION
USB MENU
NETWORK
MENU
MEMORY MENU
SYS ADJUST
MENU
MAINTENANCE
MENU
USAGE MENU
PRINT
STATISTICS
MENU
CONFIG. MENU/ NEARLIFE LED
FILE SYS MAINTE1/ FLASH
INITIALIZE
FILE SYS MAINTE2/ INITIAL LOCK
LANGUAGE MENU LANG
INITIALIZE
SETTINGS EXPLANATION
ENABLE Set up ENABLE/DISABLE condition for FX
EMULATION category.
DISABLE
If DISABLE is selected, FX EMULATION
category of USERS MENU will not appear.
ENABLE Set up ENABLE/DISABLE condition for USB
MENU category.
DISABLE
If DISABLE is selected, USB MENU category of
USERS MENU will not appear.
ENABLE Set up ENABLE/DISABLE condition for
NETWORK MENU category.
DISABLE
If DISABLE is selected, NETWORK MENU
category of USERS MENU will not appear.
ENABLE Set up ENABLE/DISABLE condition for MEMORY
MENU category.
DISABLE
If DISABLE is selected, MEMORY MENU
category of USERS MENU will not appear.
ENABLE Set up ENABLE/DISABLE condition for
SYS.ADJUST MENU category.
DISABLE
If DISABLE is selected, SYS.ADJUST MENU
category of USERS MENU will not appear.
ENABLE Set up ENABLE/DISABLE condition for
MAINTENACE MENU category.
DISABLE
If DISABLE is selected, MAINTENANCE MENU
category of USERS MENU will not appear.
ENABLE Set up ENABLE/DISABLE condition for USAGE
MENU category.
DISABLE
If DISABLE is selected, USAGE MENU category
of USERS MENU will not appear.
ENABLE Set up ENABLE/DISABLE condition for PRINT
STATISTICS category.
DISABLE
If DISABLE is selected, PRINT STATISTICS
category of USERS MENU will not appear.
ENABLE Enables/disables illumination of front panel LED
when "near-end-of-life" warning of a toner,
DISABLE
drum, fuser, or belt occurs.
Attention LED is lit when setting is enabled,
inhibited when disabled.
EXECUTE Initialises the resident FLASH MEMORY.
If NO is selected, the machine will go back to
the source menu.
If YES is selected, the machine will be
automatically rebooted and initialize the FLASH
memory.
YES If "YES" is selected, you will not be able to
select "ADMIN MENU" - "FILE SYS MAINTE1"
NO
(above).
EXECUTE Initialise the message file loaded in FLASH
MEMORY.
If NO is selected, the machine will go back to
the source menu. The procedure for clearing
the disk will start immediately after the menu
and machine reboot.
Menu functions > 34