Table of Contents
Advertisement
Top panel/Bottom panel (RF unit)
Top panel
2
Bottom panel
5
6
1 GPS (GNSS) ANTENNA CONNECTOR
[GPS ANT] (p. 13-5)
Attach a supplied GPS antenna.
2 140/430/1200 MHz ANTENNA CONNECTOR
[144/430/1200 MHz ANT] (p. 13-5)
C onnect a 50 Ω Type N coax connector for the 144,
430, and 1200 MHz band.
3 2400 MHz ANTENNA CONNECTOR
[2400 MHz ANT] (p. 13-5)
C onnect a 50 Ω Type SMA coax connector for the
2400 MHz band.
4 5600 MHz ANTENNA CONNECTOR
[5600 MHz ANT] (p. 13-5)
C onnect a 50 Ω Type SMA coax connector for the
5600 MHz band.
5 CONNECTION CABLE to the CONTROLLER
Connect to the controller with a supplied cable.
6 REFERENCE SIGNAL OUTPUT
[REF OUT 10MHz/-10dBm] (p. 13-5)
Output a 10 MHz reference signal through the BNC
connector.
7 ACC SOCKET [ACC] (p. 13-4)
Connects to devices to control an external unit or to
control the transceiver.
1
3
4
7
Speaker microphone
1
1 [PTT] SWITCH
Hold down to transmit, release to receive.
NOTE: To maximize the readability of your signal,
hold the microphone 5 to 10 cm (2 to 4 inches)
from your mouth, and then speak at your normal
voice level.
2 [A] KEY
Push to activate the assigned function of the [A]
key. (Default: Home CH)
[B] KEY
Push to activate the assigned function of the [B]
key. (Default: VFO/MEMO)
3 [▲]/[▼] (UP/DOWN) KEYS
z Push to change the operating frequency or
Memory channel.
z Hold down to continuously change the frequency
or Memory channel.
TIP: You can change the assigned function of the
[▲], [▼], [A], and [B] keys in the following item.
» SET > Function > Remote MIC Key
1-4
PANEL DESCRIPTION
Mic element
2
3
1
1
Advertisement
Table of Contents
