Table of Contents
Advertisement
8
SET MODE
Function
» SET > Function
Auto Repeater
L This item is displayed in only the USA version.
The Auto repeater function automatically turns the
duplex operation and tone encoder ON or OFF.
• OFF:
Turns OFF the function.
• ON (DUP):
Turns ON the duplex settings only.
• ON (DUP, TONE): Turns ON the duplex settings
and the tone encoder function.
RTTY Mark Frequency
Selects the RTTY mark frequency.
L When the internal RTTY decoder is used, 2125 Hz is
automatically selected.
RTTY Shift Width
Selects the RTTY shift width.
L When the internal RTTY decoder is used, 170 Hz is
automatically selected.
RTTY Keying Polarity
Selects the RTTY keying polarity.
• Normal: Key open/close = Mark/Space
• Reverse: Key open/close = Space/Mark
ATV Audio Sub Carrier Frequency
Sets the audio subcarrier frequency in the ATV mode.
• OFF:
Does not receive and transmit audio signal
in the ATV mode.
• 4.5 MHz: Sets the subcarrier frequency to 4.5 MHz.
• 6.0 MHz: Sets the subcarrier frequency to 6.0 MHz.
• 6.5 MHz: Sets the subcarrier frequency to 6.5 MHz.
(Default: ON (DUP))
(Default: 2125)
(Default: 170)
(Default: Normal)
(Default: 6.5 MHz)
8-4
» SET > Function > SPEECH
SPEECH Language
Sets the speech language to English or Japanese.
Alphabet
Selects the type of phonetic announcement.
SPEECH Speed
Sets the speech speed to Fast or Slow.
RX Call Sign SPEECH
Turns the RX Call Sign Speech function ON or OFF
for calls received in the DV mode.
RX>CS SPEECH
Turns the RX>CS Speech function ON or OFF.
MIC Up/Down SPEECH
Turns the Microphone Up/Down Speech function ON
or OFF.
• OFF: The frequency or repeater call sign is not
announced.
• ON: The frequency or repeater call sign is
announced, 1 second after pushing the
microphone's [▲]/[▼] key. In the VFO,
Memory, or Call channel mode, the frequency
is announced. When using the DR function,
the repeater call sign is announced.
S-Level SPEECH
Turns the S-meter level announcement ON or OFF.
• OFF: The operating mode and the operating
frequency are announced when you push
• ON: The signal strength level, the operating mode,
and the operating frequency are announced
when you push
MODE SPEECH
Turns the operating mode announcement ON or OFF.
• OFF: The selected operating mode is not announced.
• ON: The selected operating mode is announced.
SPEECH Level
Sets the Voice Synthesizer audio output level.
(Default: English)
(Default: Normal)
(Default: Fast)
(Default: ON (Kerchunk))
(Default: ON)
(Default: OFF)
(Default: ON)
.
.
(Default: OFF)
(Default: 50%)
Advertisement
Table of Contents
