Table of Contents
Advertisement
Setting the frequency
Inserting a Band Edge
You can insert a new Band Edge line, and enter new
band frequencies, between two entered band edges.
1. Open the "User Band Edge" screen.
2. Touch the band edge you want to insert a new
band edge above, for 1 second.
(Example: 3: 1240.000.000 – 1300.000.000 MHz)
L The new band edge will be inserted above the
selected band edge.
3. Touch "Insert."
4. Enter the lower band edge frequency then touch
[ENT]. (Example: 439.915)
Entry example: [4] [3] [9] [•] [9] [1] [5] [ENT]
5. Enter the upper band edge frequency, then touch
[ENT]. (Example: 439.95)
Entry example: [•] [9] [5] [ENT]
• The entered band edge is saved, and returns to the
previous screen.
Resetting all band edges to their defaults
The steps below will reset all the band edges to their
initial settings. All entered settings will be deleted.
1. Open the "User Band Edge" screen.
2. Touch any band edge for 1 second.
3. Touch "Default."
4. Touch [YES].
• All the band edges reset to the initial settings.
Dial Lock function
The Dial Lock function prevents frequency changes
caused by accidentally moving
L This function electronically locks the dial.
Hold down
for 1 second to turn the Dial Lock
function ON or OFF.
L You can select the Dial lock or Panel lock. (p. 8-5)
» SET > Function > Lock Function
3-8
BASIC OPERATION
.
3
3
Advertisement
Table of Contents
