Table of Contents
Advertisement
3
BASIC OPERATION
Setting the frequency
D Directly entering a frequency
Entering the Split Frequency Offset
1. Touch the MHz digits. (Example: 145)
• Opens the BAND STACKING REGISTER screen.
2. Touch [F-INP].
• Opens the F-INP screen.
3. Enter the Split Frequency Offset.
L Information
• If you want the minus shift direction, touch [•(−)].
• Enter the offset between −9.999 MHz and +9.999
MHz (1 kHz steps).
• To clear the entry, touch [CE].
• To clear the entry and return to the previous screen,
push
.
• After entering, the Split function is automatically
turned ON.
4. To save the entry, touch [SPLIT] or [−SPLIT].
• Closes the F-INP screen.
Entry examples
• 5 kHz: [5], [SPLIT]
• −10 kHz: [•(−)], [1], [0], [−SPLIT]
NOTE: If the entered operating frequency is out of
an amateur band's frequency range, the transmit
frequency is automatically set to the band edge
frequency.
Selecting a Memory channel by number
1. Select the Memory mode. (p. 3-1)
2. Select a memory group.
L To select a memory group, touch the VFO/MEMORY
3. Touch the MHz digits. (Example: 145)
• Opens the BAND STACKING REGISTER screen.
4. Touch [F-INP].
[SPLIT] or
[-SPLIT] is
displayed.
• Opens the F-INP screen.
5. Enter a Memory channel number. (Example: 2)
L If the Call channel group is selected, enter between
6. Touch [MEMO] to set the memory channel of the
entered number.
• Closes the F-INP screen.
• The selected memory channel contents are
3-5
icon, and then touch [GROUP].
"0" and "11."
0: 144 C1
1: 144 C2
2: 430 C1
3: 430 C2
4: 1200 C1
5: 1200 C2
6: 2400 C1
7: 2400 C2
8: 5600 C1
9: 5600 C2
10: 10G C1
11: 10G C2
displayed.
Memory mode
Advertisement
Table of Contents
