5. Set the desired moistener setting for your envelopes. In this photo "no seal" is selected.
6. Tap Start on the Envelope Printing app. The device automatically feeds the envelopes and
prints the postage.
If you are using a stacker, extend the stacker tray so that the envelopes exit the feeder
l
completely.
If you are moistening the envelope flaps, press down on the envelopes after printing to
l
ensure the flaps are securely glued closed.
Clearing a tape error or jam
If your device has a problem printing on a tape, you will see a message telling you the location of the
problem. Follow the on-screen instructions or the steps below to resolve the problem.
Out of tape strips
If you do not have enough tapes loaded in the tape slot, the following error message appears:
"You're out of tape strips"
Pitney Bowes
User Guide
March 2023
11 • Feeding and Jamming
123