Parts Of A Postal Frank - Pitney Bowes SendPro C Auto User Manual

1. Integrated scale - Weigh envelopes and packages.
2. Touch Screen Display - Allows you to enter and set up information on your device.
3. Postage Printer Cover - Open to get access to the ink cartridges.
4. Stacker Tray - Provides for neat stacking of printed envelopes.
5. Transport Release Lever - If a stall occurs on the transport deck, turn this to clear the
envelope, post card or tape strip.
6. Printer Deck - Envelopes or post cards pass along the printer deck where your device prints the
postage.
7. Moistener - Applies sealing fluid to the envelope flap. You can seal envelopes or leave them
unsealed, depending on the position of the Seal/No Seal lever.
8. Feed Deck - Supports your envelope, post card or tape sheet as it passes into the feeder.
9. Side guide - The moveable guide at the front of the feed deck. It stabilizes envelope position
when feeding.
10. Label Printer - Prints shipping labels.
11. Feeder Cover - Provides access to the moistener bottle and the feeder release lever. You can
use this release lever to disengage the feeder rollers from the feeder deck if you need to clear a
stoppage.
12. Seal or No Seal Lever - Allows you to turn envelope sealing on and off.
13. Tape Feeder - Stores and feeds tape strips for postage printing.

Parts of a postal frank

The postal frank impression contains components that identify the mailer and the type of mail.
Pitney Bowes User Guide March 2023
16 • Product Information
164