Power On And Off (Printer Not Working) - Brady M610 User Manual

Power On and Off (Printer not Working)

Problem
Printer does not power up when
turned on.
Screen freezes
Printer frequently powers OFF.
Printer not responding
M610 Label Printer User Manual
Cause
Battery pack is not charged.
User interface error.
Battery is low.
Auto shutoff timing.
Battery is dead.
Troubleshooting
Power On and Off (Printer not Working)
Corrective Action
Attach the AC adapter to the
printer and plug into an electrical
outlet. This will supply
immediate power while charging
the battery at the same time.
1. Press Power button to turn the
printer off.
If Power button does not shut
down printer:
2. Remove the AC adapter (if
using one).
3. Remove the battery pack, then
immediately re-insert.
4. Power ON the printer.
Attach the AC adapter to the
printer and plug into an electrical
outlet. This will supply
immediate power while charging
the battery at the same time.
Adjust the shut off delay timing
in the Setup, Config menu. (See
"Printer Configuration" on
page 9.)
• Attach the AC adapter to
provide power to the printer
and charge the battery.
• Install a new battery.
87