Vial - Brady M610 User Manual

•
5. In the Start Value field (except when "None" is selected in the Sequence Type field), enter the
first number of the sequence.
6. In the # of Strips field, enter the number of strips (labels) to be created in the block
configuration chosen.
Note: If serializing the data, additional strips will continue the serialization from the last number of
the previous strip. Example: When requesting two strips of a 2-pair horizontal configuration,
the first strip will contain values 1-24, the second strip will contain numbers 25-48.
7. When finished, navigate to OK and press ENTER.

Vial

The Vial label type can be used with any label supply except self-laminating or Permasleeve. If either
of these two types of label supply is installed, the Vial label type does not display. The Vial label type
fixes the length of the label based on the vial size selected and formats the data horizontally or
vertically.
To create a vial label:
1. Press LABEL TYPE.
2. Select Vial, then select the vial size.
The vial size determines the size of the label unless you select Auto, in which case the label
size automatically adjusts to the contents.
3. Enter the data to display on the vial label.
M610 Label Printer User Manual
In Backbone serialization, the left-most area on each strip prints with two numbers. The first
number is left-justified; the second number is right-justified. All other areas print with one
right-justified number.
2 Pair: None
2 Pair: Horizontal
2 Pair: Backbone
Label Types
Vial
63