Cleaning The Printer; Screen; Cleaning Internal Components - Brady M610 User Manual

Cleaning the Printer

Cleaning the printer will improve print quality and legibility. It also increases output, machine life,
printer reliability and performance.

Screen

To clean the screen:
1. Lightly moisten a soft (non-scratching) cloth with Isopropyl alcohol or use a pre-moistened
swab from the Brady Cleaning Kit PCK-6.
2. Gently wipe the display screen until clean.
3. Remove excess Isopropyl alcohol with a dry, soft (non-scratching) cloth.

Cleaning Internal Components

Use a Brady Cleaning Kit PCK-5, disposable cleaning card (purchased separately) to safely and
effectively remove all dirt, ribbon ink residue, adhesive, and other contaminants from the thermal print
head, platen roller, and paper path.
To clean the printer:
1. Remove the ribbon and label supply.
2. Press FN + SETUP.
3. Navigate to Config.
4. Select Clean Printer followed by pressing ENTER.
5. Close the lock lever.
6. Set the media guide to the widest position.
7. Saturate a cleaning card with Isopropyl alcohol.
8. Insert the cleaning card into the label path until it stops against the print head and platen roller.
9. Press ENTER to initiate the cleaning routine.
10. After cleaning is complete, remove printer cleaning card and dispose of it properly.
IMPORTANT!
M610 Label Printer User Manual
Allow 15 seconds for the components to dry before reloading labels and the ribbon.
Maintenance
Cleaning the Printer
74