Replacing The Printer Cover - Brady M610 User Manual

Replacing the Printer Cover

If the printer is accidentally dropped, the printer cover may come off. If the cover is not damaged, it can
be re-attached to the printer.
To re-attach the printer cover:
1. Insert the cover locking tab on one side of the printer cover with its corresponding locking
groove on the printer.
2. Gently squeeze the other side of the cover enough so its locking tab can slip into the other
locking groove of the printer.
3. Push down to snap the cover into place.
M610 Label Printer User Manual
Replacing the Printer Cover
Cover locking tab
(raised tab)
Printer locking groove
(indention)
Maintenance
77