If The Printer Does Not Print (Properly Or Not At All) - Brady BMP 91 User Manual

I. If the printer does not print (properly or not at all)...
1.
Make sure character data has been input. (If no character
data has been input, printing cannot start.)
2.
Confirm the size of the tube/label loaded in the printer and
then select the same size on-screen.
3.
Check if the ribbon cartridge has been installed properly.
Reinstall the ribbon cartridge if necessary.
4.
If the tube/label is crushed, twisted or somehow out of shape,
cut off the misshaped portion and then install the medium
again.
Do NOT use misshapened printing media.
5.
If the printhead is dirty, clean the printhead. For detailed
instructions, refer to "B. To clean the Printer" in "6.
Maintaining Your Printer".
English
90 7. Troubleshooting