Formatting Labels Using Menu Choices; Setting Vial Size - Brady LabXpert User Manual

Chapter 6

Formatting Labels Using Menu Choices

This chapter provides information on the formatting options available through the LABXPERT
menu. See Menu Basics on page 9 for general menu use instructions.
Note: Most label formatting default settings are based on the cartridge installed in the
printer.
Note: In the instruction in this and other sections, softkey choices will be named in
brackets. For example, if you are to press the Vial softkey, you will be instructed to
"Press [VIAL]". This means that you should press the gray softkey just below VIAL.

Setting Vial Size

The LABXPERT Laboratory Labeling System allows printing of vial labels, including multiple put-
TM
up (vial/vial top) labels (see Chapter 8–Advanced Features for multi-zone label details). Vial labels
can be created using any continuous media; the length is automatically determined by the vial size
chosen.
To create a vial label:
1. Press [MENU].
2. Press the [VIAL] softkey.
4. Pressing [NEXT] advances to the next
set of vial size options:
6. Make a vial size selection, then press [ENTER].
Note: You may also change a previously set vial size by selecting menu option [CONT],
then selecting [AUTO], then selecting a new vial size under the [VIAL] menu.
20
3. Press a vial size softkey, or [NEXT]
for more size options.
5. Pressing [NEXT] again advances to the
[AUTO] option. Selecting [AUTO] will
clear a previously set vial size.
TM
User Manual