Getting Started; Batteries; Ac Power Adapter; Change Settings - Oregon Scientific Silverstone FAP-101 User Manual

GETTING STARTED

BATTERIES

Batteries are supplied with this product. Replace them
whenever the low battery signal (
battery cover is located on the bottom of the unit. Slide
to open. Be sure to match the correct polarity, as
shown in the battery compartment. After you change
the batteries, press the RESET button with the point of
a blunt object (such as a ball point pen).
Do not use rechargeable batteries.

AC POWER ADAPTER

An AC power adapter is supplied for use with this
product. You must connect the power adapter if
you wish to use the continuous projection feature.
The jack is located on the bottom of the unit.
) displays. The
unit will automatically switch to battery power.

CHANGE SETTINGS

Press and hold CLOCK or ALARM for 2 seconds
to enter setting mode. Then, press
7
If the AC power becomes unavailable, the
UP or