Add, Configure, And Connect: Remote Network Element; Figure 13. Login Pop-Up - ADTRAN OPTI-6100 User Manual

OPTI-6100 OPTI-APPS User Guide

Add, Configure, and Connect: Remote Network Element

This section explains how to add a subtended NE to a GNE in the Nav Pane, configure it in the
Config Pane, and connect to it.
The configuration of a remote NE is different than the configuration of a GNE. As a GNE
already has a negotiated connection to a subtended NE, IP addresses, port numbers, and other
such information is not required; the GNE already 'knows' how to connect to the NE.
To add and configure a new Remote NE, complete the following steps:
1.
2.
3.
NOTE
OPTI-APPS automatically changes the TID to all UPPERCASE letters.
4.
NOTICE
If the OPTI-6100 NE is provisioned for case-sensitive Login information,
the User ID must match the expected value precisely.
5.
6.
7.
NOTICE
If the OPTI-6100 NE is provisioned for case-sensitive Login information,
the Password must match the expected value precisely. OPTI-APPS saves
this Password for automatic re-connections and menu session logins.
Refer to
18
Right-click the subtending GNE and select Add Remote NE.
A new NE box appears in the Nav Pane, below the GNE.
Click the new NE box (<No TID>) in the Nav Pane to select it.
In the Config Pane, enter the exact TID of the subtended NE in the TID field.
In the User ID field, enter a valid User ID (Account Name) for that system.
Click OK to save this information.
Click Login.
The Login dialog appears
Enter the Password, and then click OK to log in.
"Menu Auto Login"
(Figure 13), prompting for the Password for the User ID entered.

Figure 13. Login Pop-Up

on page 19.
61184568G1-31C